Sprinklers are also called spray trucks, multi-function sprinklers, garden sprinklers, water tankers, and water trucks. The product is equipped with front flushing, rear sprinkling, side spraying, and a rear-mounted working platform. There is a high-pressure water cannon on the platform (it can rotate 360 degrees, and the water mist shape can be adjusted to straight flushing, heavy rain, moderate rain, light rain, and drizzle; the maximum range of straight flushing is >=35 meters, and it can also be adjusted to mist with a maximum range of >=15 meters), equipped with high-quality high-power special sprinkler pumps, brand power take-offs, debris filters, national standard universal 65-type fire-fighting interfaces (water can be added through fire hydrants), 1 set of self-flowing ball valve systems (self-priming and self-draining, with a maximum suction range of 7 meters), and 2 water-supply steel wire hoses. It is suitable for cleaning various road surfaces; trees, green belts, lawn greening; roads, factory and mine construction, and high-altitude building washing. It has multiple functions such as sprinkling, dust suppression, high (low) position spraying, pesticide spraying, guardrail washing, and emergency fire fighting.
Sprinkler truck disassembly display
Special vehicle black technology: intelligent watering system. It mainly consists of three parts:
1. Power take-off protection system, one-button switch control, to prevent the power take-off from being damaged by misoperation;
2. Water level prompt alarm system, through the water level sensor, monitors the water level inside the tank, early warning, to prevent the water pump from burning out due to idling without water;
3. Voice prompt in the cab, all-round guidance, to prevent vehicle damage caused by improper use by novices. The pipe bends are welded without welding, to prevent blockage, to make the water flow more unobstructed, and equipped with large-diameter ball valves throughout the vehicle.
Vehicle parameters
| product name |
Futian Pilot 15 cubic meter water sprinkler |
product model |
DFH5180GPSEX8S |
| gross mass(Kg) |
16000(Kg) |
curb weight(Kg) |
6280(Kg) |
| Rated load quality(Kg) |
9525(Kg) |
external dimensions(mm) |
7700*2480*3200(mm) |
| wheel base(mm) |
3950 |
effluent standard |
National III,IV,V,VI |
| Chassis model |
DBJ1184VLPFD-01 |
engine type |
YCY30170-61 |
| tyre size |
10.00R20 Steel Wire Tire |
| Dedicated Features |
Chassis configuration: Foton ES7 luxury cab, Yuchai 4-cylinder 200 horsepower, 3950 wheelbase, Fast 8-speed gearbox, 9-ton reinforced rear axle, 275 vacuum tire/10.00 wire tire, central locking, electric doors and windows, original air conditioning, remote control key, shock-absorbing seat, ABS, T-BOX, driving recorder.
Special performance of watering truck: front flush (spray) and rear sprinkler, with side spray, with rear working platform, greening watering high-pressure gun installed on the platform (the spray shape of the gun is adjustable: straight flush, heavy rain, medium rain, drizzle, can be adjusted continuously, the maximum range can reach 30 meters), equipped with a high-power special sprinkler pump, with fire joint, with self-flow valve, with self-priming function, with filter. Suction range ≥6 meters, watering width ≥14 |
Sprinkler truck details
Sprinkler installation configuration
Common accessories for sprinkler trucks
Precautions for sprinkler trucks
1. When the sprinkler truck uses ditches and ponds as water sources, make sure that the end of the water suction pipe is completely submerged in the water. To avoid sucking in stones or more mud and floating debris, it is best to install a filter device at the water suction port of the water suction pipe. If the water source is shallow, it is necessary to dig the water suction place deeper in advance to ensure that it does not contain debris and does not enter the air.
2. When the self-priming water pump is used for the first time, it is necessary to add water, and no water is needed in the future. When absorbing water, the water inlet pipe system must maintain a certain vacuum degree to suck water into the tank. The water inlet pipe system must be sealed reliably, the hose cannot be damaged, and the hard pipe cannot have cracks, otherwise it will leak, which will cause the situation where water cannot be sucked.
3. Whether it is before absorbing water or before sprinkling water, the power take-off device must be engaged when the sprinkler truck is parked. Before the arrival of winter, the water in the water pump and water pipe should be emptied to prevent freezing and cracking. Generally, no construction is carried out in the north during the severe winter, so after the construction is completed, the water in the water pump and water pipes should be drained immediately to prevent future troubles.
Some production equipment
Chengli Group ranks 11th among the Top 100 Private Enterprises in Hubei Province and 4th among the Top 100 Private Manufacturing Enterprises in Hubei Province. It has been shortlisted among the Top 500 Private Enterprises in China. It has been awarded the honorary title of "Top 100 Taxpayers of the Provincial State Taxation in Hubei Province" by the Hubei Provincial State Taxation Bureau, and it is also recognized as a "High-tech Enterprise" in Hubei Province and an enterprise that "Abides by Contracts and Values Credit" in Hubei Province. The Party Committee of the Group has been rated as "One of the Top 100 Strong Party Organizations in the Non-public Economy in Hubei Province". The "Chengliwei" sprinkler truck has been rated as a "Famous Brand in Hubei Province". The brand "Chengliwei" has won the title of a Famous Trademark in Hubei Province and a Well-known Trademark in China.
Strategic Cooperation
Transaction Cases
Batch delivery
Frequently Asked Questions
Q1. Is your company a factory or a trading company?
A: We are a leading manufacturer of special trucks, tank trucks, trailers, and spare parts in China. Welcome to visit our special vehicle production base in Suizhou City, China.
Q2. What are your payment terms?
A: T/T 30-50% as deposit, the rest to be paid before delivery. We will show you photos of the products and packages before you pay the balance.
Q3. What are your delivery terms?
A: EXW, FOB, CFR, CIF, DAF, DDU.
Q4. How about your delivery time?
A: Generally, it takes 20 to 30 days after receiving the advance payment. The specific delivery time depends on the items and quantity of the order.
Q5. Can you customize the products to meet my requirements?
A: Yes. We have a professional R&D team, and we can produce products exactly as you require.
Q6. What is the price of your products?
A: We are factory direct sales, so the price is very competitive. Different products have different prices. The price
also depends on your special needs. To know the exact price, please contact us!
Q7. Do you test all the goods before delivery?
A: Yes, we do 100% testing before delivery.
Q8: What service can I get from you?
A: We provide lifetime tracking service and a one-year free warranty for all our products. At the same time, we provide free training and technical support to guide you to repair the product. We will also provide original spare parts if necessary, and you only need to pay the shipping cost.
){kind=link}