| Customization: | Available |
|---|---|
| After-sales Service: | Remote Technical Guidance |
| Warranty: | Remote Technical Guidance |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
| Parameter | Details |
|---|---|
| Vehicle Model | CL5310GXY6ACC |
| Batch Announcement | 377 |
| Overall Dimensions (mm) | Length×Width×Height: 12390×2550×3990 |
| Chassis Configuration | |
| Chassis Model | SX1319MC6F1C (National VI) |
| Engine Power (hp/kw) | 350/257 |
| Engine Model | WP8.350 National VI |
| Driving Mode | 8x4 |
| Turning Diameter (outer maximum) (m) | 24 |
| Tires | 11.00 - 20 steel - wire tires / 13 sets (including spare tire) |
| Wheelbase (mm) | 1800 + 4575 + 1400 |
| Maximum Chassis Allowable Gross Mass (kg) | 31000 |
| Vehicle Kerb Mass (kg) | 20900 |
| Tank Configuration | |
| Total Tank Volume (m³) | 23.2 |
| Head Type | Spinning - forming |
| Maximum Tank Lifting Angle | 45º |
| Maximum Working Negative Pressure in Tank (mPa) | -0.06/0.078 |
| Suction System Configuration | |
| Vacuum Pump | Roots - type |
| Drive Mode | Independent vehicle - mounted power take - off |
| Suction Mode | Negative - pressure suction |
| Maximum Working Negative Pressure (MPa) | -0.06/0.078 (Optional imported pump can reach - 0.09) |
| Suction Speed (t/h) | 30 - 80 (The best speed is adjusted on - site according to the material properties and the actual silo.) |
| Inner Diameter of Suction Pipe (mm) | 150 |
| Dust Filtration Mode | Gravity - inertia dust removal, bag filtration |
| Filter Bag Dust - cleaning Mode | Reverse - blowing |
| Exhaust Dust Content (mg/m³) | 20 |
| Discharge System Configuration | |
| Gas Source Equipment | Air compressor or ground external gas source |
| Air Compressor | Swing - rod oil - free type |
| Discharge Mode | 1. Pressure discharge 2. Open the rear cover and lift for dumping in emergency |
| Maximum Working Pressure (mPa) | 0.2 (Ground gas source flow ≥ 15m³/min) |
| Pressure Discharge Speed (t/h) | 30 - 80 (When there is no external gas source, the discharge height can reach 23 meters, with cement as the reference material. The best speed is adjusted on - site according to the material properties and the actual silo.) |
| Inner Diameter of Discharge Pipe (mm) | 100 |
| Rear Cover Opening Mode | Manual hydraulic opening |
| Maximum Rear Cover Opening Angle | 76º |
| Rear Cover Locking Mode | Bolt and hydraulic locking |
| Residual Material Rate in Tank | 2‰ |
| Hydraulic Lifting System Configuration | |
| System Pressure (MPa) | 16 |
| Hydraulic Oil Tank Volume (L) | ~80 |
| Lifting Cylinder | Jiaheng / Hyva |
| Other Configuration | |
| Suction Valve | Valve DN200, Interface DN150 |
| Discharge Valve | Valve DN125, Interface DN100 |
| Other Valves | DN50 - DN200 |
| Wear - resistant Components | Straight pipes and bent pipes with special processes from professional manufacturers (installed at the elbows of suction and discharge pipelines) |
The suction - pressure vehicle, abbreviated as the suction - discharge vehicle, is applicable to industries such as metallurgy, chemical engineering, energy, building materials, coal, mining, and terminal transportation. It is used for the collection, transfer, and transportation of nearly a hundred types of dust and granular materials under various working conditions. It can carry dust materials such as those from iron - making, steel - making, sintering, coking, raw materials, purification and dust - removal of calcium carbide furnaces, gas - fired lime kilns, silicon - removal in smelting, dephosphorizers, coke powder, aluminum powder, cement, mineral powder, lime powder, limestone dust - removal ash, and mixed dust - removal ash. The suction - discharge vehicle is a high - efficiency, safe, and environmentally - friendly special - purpose vehicle for cleaning and transporting bulk materials.
Chengli Group is a large automobile manufacturing group that owns the "China Famous Trademark", "Hubei Brand Name", "National High-tech Enterprise", and is among "China's Top 500 Private Enterprises". It integrates whole vehicle manufacturing, automotive technology research and development, special vehicle manufacturing, bus manufacturing, automotive modification, automotive parts, finance, education, and real estate investment into a diversified group company. Currently, compared with peers in the industry, the Group has complete production qualifications and a wide variety of products. The company's sanitation vehicles and light-duty special-purpose vehicles rank among the top nationwide in terms of production and sales volume. It was the first in the country to pass the A2 and C2 three-category pressure vessel certification in one go; the upgrade from low-speed trucks to light-duty cargo truck production qualifications passed national review and acceptance; it is a private enterprise that has passed the new national standard acceptance for fire trucks. It is also an enterprise in the province that has obtained production and manufacturing qualifications for cranes mounted on trucks, and it is a leading enterprise in the special-purpose vehicle industry in Suizhou City, known as China's Capital of Special-Purpose Vehicles.
1:What payment methods do you support? - We support T/T and LC and other ways you need.
2:What is your minimum order quantity? - One unit.
3. How about the delivery time? - Generally it will takes 10 to 30 days after receiving your deposit. The sactual date will be depended on your order and item. We will contact you if we confirm the delivery date. And we will track the goods all the time until the goods reach to the destination.
4.How can I confirm whether your products will meet my needs? -You can tell us your needs such as size, material, volume, height and other information, our professional sales will provide solutions.
5. How do you pack the products? - Standard shipping packaging.
6. How about the price? - To provide the top quality product with competitive price is our mission all the time. We want a long-term business relatonship with our customers rather than cooperate for once.
7. How can I trust you? - We have 15 years of experience in the trailer manufacturing field; and we have our own factory. - We have supplied for many famous company at home and abroad; - We want to provide great service for you rather than just provide a price and product for you; - To meet you is the first step, then we would like to make friends and maintain the business relationship with you all the time.
Remote technical support
){kind=link}